Ball valve Performance
| Pneumatic Actuator Parameters |
Pneumatic Operated On Off Ball Valve Parameters |
| Actuator Type |
single-acting(FO,FC),double-acting (FL) |
Nominal Diameter |
DN15～200mm |
| Air Supply Pressure |
double-acting：2-8bar; single-acting：4-8bar |
Nominal Pressure |
PN16,PN25,PN40,etc |
| Output Torque |
double-acting：4N·M～10560N·M |
Valve Stem |
stainless steel |
| single-acting：7N·M～2668N·M |
Body Material |
SS304,SS316,SS316L |
| Working Temperature |
Normal temperature type：-20℃～80℃（Nitrile rubber O-ring） |
Valve Ball |
SS304 |
| High temperature type：-20℃～160℃（Fluorocarbon O-ring） |
Seat Seal |
PTFE/PCTFE |
| Action Range |
0～90°±5° |
End Connnection |
flange type |
| Interface thread |
GTD40～GTD83/ATD50～ATD88 G1/8″ |
Application Medium |
Water,steam,oil,gas |
| GTD110～GTD350/ATD100～200 G1/4″ |
| Valve position signal |
Positioner:4~20mA;
Limit Switch:full open/full close signal |
Feature |
flexible open & close and reliable sealing |
Pneumatic Operated On Off Ball Valve Applicable Standards:
Design: API6D, API608,ASME B16.34, ISO14313, MSS SP-72
Face to face: ASME B16.10,AP6D
Flange end: ASME B16.5,ASME B16.47,EN1092, GOST 33259,etc.
Butt welded end: ASME B16.25
Leakage standard: ANSI B16.104
Inspection and test API 598,API6D
